Stand in the doorway of a small bathroom and picture a hinged door opening toward you. In a lot of Teaneck's original baths there is nowhere for it to go. A bypass enclosure solves that by putting two panels on one track and letting them pass each other, so the glass never leaves the plane of the opening. We build them to your alcove, over a tub or a curb, and measure in your home for free.
The track is the part worth understanding. It spans the top of the opening, carries both panels on rollers, and keeps them running true for years if it is set level and cut to the right length. We build ours slim and low profile so the metal stays out of the way visually, and we cut it in the shop to the exact width we measured, not on site with a hacksaw and hope. Below, a bottom guide holds the panels in line. Heavy tempered safety glass gives the doors weight, so they glide instead of rattling.
From there the choices run the same as our frameless work. Glass comes in 3/8 and 1/2 inch tempered safety glass, low-iron ultra-clear is there if you want the green tint gone, and the easy-clean coating helps the panels shed water. Track, handles and hardware come in fifteen finishes, which matters more on a slider because the header is visible from the doorway. Everything is fabricated in the Lodi shop, generally one to two weeks after we template, and a bypass install is usually wrapped up in one visit, with no change to the tile around it.
Floor space is the whole argument here. The Cape Cods and split-levels scattered through Teaneck were drawn when a bathroom was expected to be efficient, not generous, and the hall bath in one of those houses often measures out smaller than the vanity, toilet and doorway want it to be. A swinging door eats a quarter circle of that floor every time it opens. Bypass panels never claim any of it. You keep the walking room, and the shower still closes behind real glass rather than a curtain. It is the simplest fix in a tight room.
Then there are the tubs nobody wants to give up. In plenty of Teaneck's older colonials and two-families, the tub in the main bath is staying exactly where it is, and the family simply wants it closed in with glass instead of a curtain. Sliding panels sit right on the tub deck and give that alcove a clean enclosure without touching the tub, the tile or the plumbing. We check the deck height, the wall condition and the true width at the measure, then build the panels to suit. Our Lodi shop is twelve minutes away, so scheduling that visit is easy.
Sliding enclosures and tub panels from homes in Teaneck and the towns around it.
More custom glass in Teaneck: frameless shower doors, semi-frameless shower doors, shower door replacement, custom mirrors, custom glass shower enclosures, steam shower enclosures, bathtub shower doors, glass railings, commercial glass. See everything on our Teaneck, NJ page. Sliding & Bypass Shower Doors nearby: Paramus, Ridgewood, Hackensack, Fort Lee, Lodi, Midland Park, Englewood. Learn more about our sliding frameless shower doors statewide, or read the How much do shower doors cost in NJ? and Modern shower design ideas that last guides.
The closest place is our Lodi showroom at 80 Industrial Rd, roughly twelve minutes from Teaneck down Route 4, open Monday to Friday nine to five and Saturday nine to four. You can run real track samples, compare clear against low-iron glass and look at every finish. Midland Park is our other showroom, farther north, by appointment. Call (201) 460-1313 first and someone will be free for you.
There is no flat rate, because the door is built to your opening. Width drives it first, since a wider alcove means more glass and a longer track. Glass thickness and type matter, and so does the finish you pick for the track and handles. Whether it sits on a tub deck or a curb changes the build as well. A free measure turns all of that into an actual quote.
Usually, yes. Tub alcoves are where bypass glass does its best work, because a hinged door has nowhere safe to swing over a tub wall. We set the track across the alcove and hang two panels that pass side to side. At the measure we confirm the deck height, the width at three points and how true the walls run, then build to those numbers.
Not the way we build them. The framed aluminum sliders in a lot of older Teaneck baths were thin glass in a thick, pitted frame that collected mildew in the channels. Ours are heavy tempered glass on a slim header, with the metal kept to what actually holds the doors up. Same no-swing convenience, a much cleaner look, and hardware finished to match the room.
Measure the clear floor in front of the shower before you decide. If a hinged panel would knock the vanity, the toilet or the door casing on its way open, a bypass unit is the better call. If the room has the space and you want the frameless look, hinged is worth considering. We will walk the room with you and give a straight recommendation.
Figure one to two weeks from the template to the install day. We measure at your house, cut the glass and the track in Lodi, then come back and set it, normally in a single visit. Because the shop sits twelve minutes down Route 4, getting the measure booked and the crew back out to Teaneck does not add much to that.
Two numbers get this moving: the width of your alcove and whether the glass lands on a tub or a curb. Call, text those over, or book the free in-home measure anywhere in Teaneck.
Two numbers get this moving: the width of your alcove and whether the glass lands on a tub or a curb. Call, text those over, or book the free in-home measure anywhere in Teaneck.
Text Jessica directly and she'll get right back to you. To speed things up, include:
