Tree lined streets are the best thing about Fair Lawn and the reason so many of its rooms go dim early. Mature shade outside plus a small original bathroom window inside adds up to a room where the light never quite arrives. A mirror is the cheapest fix there is, provided it is the right size and it lands on the right wall. We cut every piece to your dimensions, finish the edge polished or beveled, and hang it level and secure rather than clipping it up and hoping. Vanity mirrors, full length pieces, mirrored walls, gym runs. We measure the walls at your Fair Lawn house at no cost.
The instinct with a mirror is to measure the wall and cut to it. That is usually wrong. What the eye actually reads is the relationship between the glass and everything around it: the vanity centerline, the backsplash line, the sconces, the door casing, the tile edge. So those are what we measure. A mirror that stops an inch above the backsplash and lines up on the cabinet reads as built in, even when the wall behind it is two inches wider on one side. A mirror cut wall to wall in a room that is not square announces every bit of that lean. At the measure we lay the piece out against the fixtures first, then see what the wall will allow.
Then the glass itself. Edges are cut, seamed and finished in our Lodi shop. Which edge you pick decides whether the mirror reads as a surface or as an object. Polished, and the glass simply stops, which is what you want on a vanity wall where the mirror is there to do a job. Beveled, and the border picks up a line of light that frames whatever is standing in it, which suits the older rooms in these houses. Holes for sconces and notches around a tile ledge or an outlet are cut here too, laid out from the measurements taken at your house. For hanging, big mirrors are heavy and adhesive on its own is not a plan we like. We set them on cleats or clips fastened into something solid, with a small gap behind the glass so a bathroom wall can breathe and the bottom edge is never sitting in water.
Fair Lawn's older houses were drawn long before anyone thought about an open plan. Rooms are separate, hallways are narrow, and the windows sit where the builder put them, which is often not where the light is now that the street trees have had ninety years to fill in. A mirror is the only thing you can hang that adds light instead of using it up. Put a wide piece opposite the window in a Radburn colonial and the room gets the same daylight twice. Run mirror down a dim hallway or up a landing wall in a split-level and the whole floor loosens up. It is glass, and it is one afternoon of work.
The bathroom is where it pays off hardest, because that is the smallest room with the worst light in most of these houses. A single piece sized to the full vanity, running from the backsplash up to the height of the door casing, does more for a Fair Lawn hall bath than new fixtures will. And if we are already coming out for shower glass, say so on the call. We can template the enclosure and lay out the mirror on the same visit, cut both in the same shop run, and set them together, which keeps a crew in the house once instead of twice. Lodi is nine minutes off in any case.
Vanity mirrors, wall runs and full length pieces, all cut and edged in our Lodi shop. Click any photo to see the edges up close.
More custom glass in Fair Lawn: frameless shower doors, sliding & bypass shower doors, semi-frameless shower doors, shower door replacement, custom glass shower enclosures, steam shower enclosures, bathtub shower doors, glass railings, commercial glass. See everything on our Fair Lawn, NJ page. Custom Mirrors nearby: Paramus, Ridgewood, Hackensack, Fort Lee, Lodi, Midland Park, Englewood, Teaneck, Mahwah. Learn more about our custom mirrors statewide, or read the Vanity mirrors: framed vs. frameless and The complete custom mirror wall guide guides.
Yes, though it works differently than people expect. A mirror does not make light, it moves it. In a room with one small window and heavy shade outside, a large piece on the wall across from that window takes whatever does come in and throws it back across the room, which reads as brighter and deeper. It doubles the fixtures you already have as well. The bigger the piece, and the more squarely it faces the light source, the more obvious the effect becomes.
We cut for them. Holes for sconce boxes, notches around a tile ledge, cutouts for an outlet or a switch all get machined in the shop from measurements taken at the house, so nothing is drilled in your bathroom. Layout matters as much as the cut: we set the piece so the sconces land where they light your face rather than the top of your head, and so each hole sits with enough glass around it. Send a photo and we can talk it through before the measure.
Not necessarily, and it is worth deciding on purpose. Matching the cabinet width reads tidy and is the safe answer in a small bath. Running the glass wider, wall to wall above a backsplash, makes the room feel considerably larger and is usually the better move in a narrow room. Going narrower than the vanity and centering it suits a piece with a heavy bevel, where you want the mirror to read as an object rather than a surface. We will show you the options against your actual wall.
Yes, and it is the sensible way to run it. One measure covers both, the mirror and the enclosure get cut in the same shop run, and the install happens in a single appointment instead of two. It also lets us match hardware and finish across the room, so the mirror clips, the shower hinges and the handle are not three different metals. If the bathroom is being remodeled, both get measured after the tile is finished and cured.
Price follows the glass. Square footage is the biggest single factor, then thickness, which goes up for long runs that have to stay flat. The edge matters too, since a bevel is more work than a polish. Cutouts for sconces and outlets add a little, and the install adds more when a piece is large enough to need two people and proper backing. There is no useful number to give over the phone, but the written quote after the free measure lists each of those separately.
Nine minutes away, at 80 Industrial Rd in Lodi. Weekdays 9 to 5, Saturday 9 to 4. The glass and finish selection wall there lets you compare edges and hardware finishes in person, which is worth doing, because a bevel looks very different in daylight than it does in a photograph. Our Midland Park showroom is roughly sixteen minutes away and runs by appointment. There is no Accurate location in Fair Lawn itself.
Give us the room, a rough width and height, and whether you lean polished or beveled, and Jessica can get a number moving. For anything large, or anything with sconces in the way, the free measure at your Fair Lawn home is the better place to start. Call or text (201) 460-1313.
Give us the room, a rough width and height, and whether you lean polished or beveled, and Jessica can get a number moving. For anything large, or anything with sconces in the way, the free measure at your Fair Lawn home is the better place to start. Call or text (201) 460-1313.
Text Jessica directly and she'll get right back to you. To speed things up, include:
