Most houses have more than one bathroom, and they do not all deserve the same budget. Semi-frameless is the answer for the second one: heavy tempered glass, a slim channel along the edges that need support, and open glass everywhere else. It handles an out-of-square wall better than full frameless does, which matters in an Englewood colonial. Same glass options, same 15 hardware finishes, same free in-home measure to start.
Think of the framing as structure, not decoration. A narrow channel runs along the edges that take load or meet a wall, usually the fixed panel and the jamb, and the rest of the enclosure is left as bare glass with a polished edge. Because that channel carries some of the weight and takes up small variations in the wall, the glass does not have to be as thick and the hardware does not have to be as heavy. That is where the savings come from, and it is a real engineering difference rather than a downgrade in quality.
Nothing else about the build changes. Every panel is tempered safety glass, cut for your opening in the Lodi shop, with the channel finish matched to the handles and the rest of the room from our 15 options. Low-iron ultra-clear glass is on the table here too, and so is the protective coating. Layouts we build this way include a single swing door with a fixed return panel, an inline enclosure across a tub, and corner setups. Fabrication runs about 1 to 2 weeks after the measure, and installation is generally one visit.
Englewood housing skews old in the best way. The colonials off Palisade Avenue and the estates up on the East Hill have been standing long enough that walls have settled, tile has been reset once or twice, and openings have quietly gone out of square. Full frameless can absolutely be built there, since we template every job anyway. But a slim channel gives us a little tolerance to work with along the wall, and in a house of that vintage that tolerance is worth having. It also means fewer surprises on install day for everyone.
The other reason it comes up here is arithmetic. The bigger East Hill houses rarely stop at one bathroom, and owners often put the heavy 1/2 inch frameless build in the primary bath while a secondary bath gets semi-frameless. Same glass, same finishes, same crew, and the project as a whole lands somewhere sensible. We are glad to price both ways at the measure so you can compare them side by side and decide with real numbers in front of you rather than a guess. It is your call, not ours.
Semi-frameless enclosures we have made for Englewood and nearby Bergen County bathrooms.
More custom glass in Englewood: frameless shower doors, sliding & bypass shower doors, shower door replacement, custom mirrors, custom glass shower enclosures, steam shower enclosures, bathtub shower doors, glass railings, commercial glass. See everything on our Englewood, NJ page. Semi-Frameless Shower Doors nearby: Paramus, Ridgewood, Hackensack, Fort Lee, Lodi, Midland Park, Teaneck. Learn more about our shower doors & enclosures statewide, or read the Frameless vs. semi-frameless: which is right? and How much do shower doors cost in NJ? guides.
The framing is the difference, and it is structural. On a frameless enclosure the glass carries everything, so it has to be thick and the hardware heavy. On semi-frameless, a narrow channel along a couple of edges shares that job, which lets us use lighter glass and simpler hardware. Visually you still get mostly open glass, just with a slim line at the wall.
It often is. Houses that old have settled, and the opening you are working with is rarely the shape a catalog assumes. A channel along the wall gives us a small amount of adjustment to play with, which makes for a tighter finish against tile that is not perfectly plumb. We template regardless, so either style can be built here. This one is simply more forgiving.
It generally comes in under a comparable frameless build, because the framing lets us use lighter glass and less hardware. How much depends on the size of the opening, the thickness you choose, the glass type and the finish. Rather than guess, we walk both options at the free in-home measure and write a price on each so you can compare them honestly.
You would want the Lodi showroom at 80 Industrial Rd, about 14 minutes west, since there is no Accurate location in town. Frameless and semi-frameless enclosures are both set up there, along with mirror samples and every hardware finish. Weekdays 9 to 5, Saturday 9 to 4. Midland Park on Greenwood Ave is farther northwest and runs by appointment.
Roughly 1 to 2 weeks between the measure and the install. The template goes back to Lodi, the glass gets cut and edged, the channel is fabricated to length, and then our crew comes back to set it, usually in a single visit. If you are coordinating with a tile setter or a painter, tell us and we will fit the schedule around them.
Yes. An inline enclosure across a tub opening is one of the layouts this style suits best, with the channel anchored to the existing walls and the tub staying right where it is. Nothing gets torn out. At the measure we check the tub height, the wall surface and the true width, then cut the glass and the channel to that opening.
See both options priced on the same visit. We will measure your Englewood bathroom at no charge, write up frameless and semi-frameless side by side, and let the numbers make the argument. Photos to Jessica work too.
See both options priced on the same visit. We will measure your Englewood bathroom at no charge, write up frameless and semi-frameless side by side, and let the numbers make the argument. Photos to Jessica work too.
Text Jessica directly and she'll get right back to you. To speed things up, include:
