A frameless enclosure is glass, a pair of hinges and a clip or two. Nothing else holds it up, and nothing hides a gap, so the panel has to be cut for the opening you actually have rather than the one a catalog assumes. We template every Mahwah bathroom by hand, cut the glass in our own Lodi shop and set it with our own crew. Thickness runs 3/8 or 1/2 inch, both tempered safety glass, with hinges and clips in polished chrome, brushed nickel, matte black or oil-rubbed bronze. The measure at your house costs nothing. If you want to see finished glass first, our Midland Park showroom is about 16 minutes away and runs by appointment.
Tempered glass cannot be trimmed, drilled or notched after it goes through the oven. The hinge cutouts, the handle holes, the notch that clears a shower arm: all of it is cut while the panel is still soft enough to work, and only then does the glass get heat treated. Get a dimension wrong and there is nothing to adjust on site. You make the panel over. That is the reason we template a Mahwah opening instead of measuring it in three places and hoping for the best. A template records the wall that leans a quarter inch over six feet, the curb that pitches back toward the drain, the tile course that steps out at the top. Those numbers become the cut list, and the glass that comes back from the shop fits the room you have.
The rest is decisions, and they are yours to make. Three eighths is the common thickness and it already feels substantial in the hand. Half inch is heavier, stiffer and quieter, and it is what we reach for when a panel gets tall or wide. Standard clear glass carries a faint green cast that most people never notice until they see low iron beside it, and on a large panel that difference is easier to pick out. Hinges, clips and handles come in polished chrome, brushed nickel, matte black or oil-rubbed bronze. We settle the practical things at the measure too: which way the door swings, where the handle lands, how the bottom of the opening gets sealed. On install day the glass goes into anchors set in solid backing, then we ask you to leave the sealant alone for a day before running water.
The custom homes and estates tucked into the Ramapo Mountains were drawn with room to spare, and the master suites are where it shows. The shower openings follow: tall walls, long runs of tile, an opening that would swallow a catalog door. Big glass changes the engineering. A panel that height wants half inch glass to stay flat and quiet, the hinge count goes up, and a long fixed panel may need a support bar tying it back to the wall. Those calls get made at the template, with a tape on the actual opening, because the difference between a door that closes sweetly and one that drags shows up an eighth of an inch at a time.
The rooms themselves argue for frameless. A bath with windows onto the woods or the ridge loses much of that light the moment you hang a framed door across it, and a clear enclosure keeps the view and the daylight running from one end of the room to the other. Low iron glass is worth considering at that size, since the faint green edge of standard glass reads more strongly across a big panel. Getting the glass there is its own piece of work. Long driveways, finished floors and a carry up a staircase all get planned before install day rather than discovered on it, and our own crew handles the panels from the truck to the wall.
Enclosures our crew has built and set in Mahwah and the surrounding Bergen County towns. Tap any photo to see it larger.
More custom glass in Mahwah: sliding & bypass shower doors, semi-frameless shower doors, shower door replacement, custom mirrors, custom glass shower enclosures, steam shower enclosures, bathtub shower doors, glass railings, commercial glass. See everything on our Mahwah, NJ page. Frameless Shower Doors nearby: Paramus, Ridgewood, Hackensack, Fort Lee, Lodi, Midland Park, Englewood, Teaneck, Fair Lawn. Learn more about our frameless shower enclosures statewide, or read the How much do frameless shower doors cost in NJ? and Frameless vs. semi-frameless: which is right? guides.
Yes, all of Mahwah 07430, ridge included. There is no Accurate showroom in town, but our Midland Park showroom on Greenwood Ave sits about 16 minutes away and the Lodi shop is roughly 27 minutes south. The township is big enough that a visit gets planned properly rather than squeezed between two others: we template the opening, talk through glass and hardware, and leave you with numbers. The measure is free and nothing about it obligates you to anything.
Four things move it more than the rest. Size, because the glass is priced by what it takes to cover the opening. Thickness, since half inch costs more than three eighths and weighs more to handle. Hardware, because a heavier door needs more of it and the finishes are not all priced alike. And the shape of the opening: a straight inline panel is simpler than a corner, a return or a neo-angle. Walls well out of square add work as well. We measure first, then put an itemized price in writing.
Rarely, but size changes how it gets built. Past a certain span a single panel stops being the right answer, so the opening is divided into a door and one or more fixed panels, and a header or support bar ties the assembly back to the structure. Height matters as much as width. A tall panel flexes if it is underspecified, which is why oversized Mahwah openings usually land on half inch glass. Give us the dimensions and we will tell you honestly what the opening will and will not take.
Our Midland Park showroom is the nearest one to Mahwah, about 16 minutes away at 108 Greenwood Ave, and it runs by appointment only, so call ahead and we will have it open for you. Inside there are full enclosure displays and a glass and finish selection wall, which is the fastest way to see polished chrome next to brushed nickel, matte black and oil-rubbed bronze. The main Lodi showroom at 80 Industrial Rd is about 27 minutes south, open weekdays and Saturday.
Sometimes, and it is a structural question rather than a style one. A long fixed panel standing on its own will flex, and a bar running back to the wall or across to the return stops that. Whether yours needs one depends on the span, the glass thickness and where the door hangs. Plenty of enclosures do without. If a bar is needed we will say so at the measure and show you what it looks like, rather than surprising you with it on install day.
Barely at all until install day. We template early, the glass is cut and edged at our shop, and the old enclosure only comes out once the new panels are on the truck. Fabrication is usually a couple of weeks, longer if the glass is oversized or a hardware finish has to come in. The install itself is normally a single visit. After that, give the sealant a day before you run water and the room is yours again.
Give us the rough width and height, and say whether the bottom of the glass meets a tiled curb or a tub rim. That is enough for a sensible first conversation. When you want real numbers, the measure at the house is free: call or text (201) 507-5918 and Jessica will get it on the calendar.
Give us the rough width and height, and say whether the bottom of the glass meets a tiled curb or a tub rim. That is enough for a sensible first conversation. When you want real numbers, the measure at the house is free: call or text (201) 507-5918 and Jessica will get it on the calendar.
Text Jessica directly and she'll get right back to you. To speed things up, include:
