If the goal is frameless glass in a Franklin Lakes bathroom, the order runs through a custom glass shop rather than a retailer. Accurate Glass & Mirror covers the town from Midland Park, about twelve minutes out and open by appointment, and from its Lodi fabrication shop. Measure, glass, hardware and installation come from one company.
Plenty of bathrooms here are not a rectangle with a door across the front. Neo-angle corners, corner enclosures, tub mounted panels and steam rooms running to the ceiling are made rather than assembled, and each begins with the same measured drawing. Angles in a neo-angle are rarely the clean numbers the tile layout implies, so they get taken on site.
Steam is its own build. Containing vapor usually means a transom above the door, a sealed head and hardware selected for constant heat and moisture. That is a design conversation before it is a purchase, and it goes better while the tile plan can still move.
The measurer records the opening, the plumb of each wall, the curb pitch and the ceiling, then works through the choices with you in the room: 3/8 or 1/2 inch glass, clear or low iron, and a hinge finish in brushed nickel, polished chrome, oil rubbed bronze or matte black. Nothing gets cut until those are settled and the quote is signed off.
Larger rooms raise their own questions. A panel past a certain height may want a header or a support bar, a return meeting a knee wall needs that wall checked for plumb along its full run, and a bench cutting into the opening can move where the door has to hinge. All of it lands on one drawing.
The Midland Park showroom carries glass, hardware finishes and samples and opens by appointment at (201) 507-5918, so the time is set in advance. If you want to stand inside a full enclosure first, the Lodi showroom is a walk-in with working displays and a selection wall. Either way the panels are cut and edged in Lodi, and Accurate Glass & Mirror's own crew, licensed and insured, does the installation.
Renovation timing belongs in the same conversation. A rough visit while framing is still exposed lets curb pitch, blocking and valve height be set with the glass in mind, and the final measure comes later, once tile is finished. Fabrication always works from that second set of numbers, never the first.
Yes, and it is common in custom work. A neo-angle uses two return panels meeting a door at an angle, and frameless hardware handles that geometry well. The angles have to be verified on site, and the door needs enough clearance to open without striking a return panel, a vanity or a towel bar.
Steam has to be contained rather than drained, so the enclosure typically reaches the ceiling with a fixed transom above the door, and joints are sealed instead of left open. Hardware and any vent get chosen for constant heat and moisture. It is a different build, planned at the measure rather than adapted afterward.
Call (201) 507-5918 to book the Midland Park showroom or a measure at the house. Bringing a glass shop in during the design stage, while curb, bench and valve locations can still move, is the simplest way to avoid a compromise later.
