A neo-angle shower is a corner enclosure built from three glass faces: two side panels that meet the walls and a front panel or door set on a diagonal between them. The angled front turns a square corner into a five-sided footprint, which points the entry toward the room and frees floor space in front of the vanity.
Two reasons, and both are about floor. A square corner enclosure puts a flat wall of glass across the diagonal of the room, and its door has to swing out into whatever is standing there. Cutting the front on an angle pulls the door back into the corner and aims it at open floor, so it clears a vanity or a toilet that a straight run would hit. The angle also turns the entry toward the room. A door set on the diagonal face opens where you actually stand rather than tight against a corner wall, so you step in and out straight ahead instead of sideways, which is why the shape turns up so often in older Bergen County baths where the room is small and every fixture is already placed.
Precision, mostly. A neo-angle sits on a base or a tiled curb built to the same angle as the glass, and the two have to agree within a very small margin. Side walls are rarely plumb in a house that has settled, so each panel is measured on its own and the angle is taken off the finished surfaces rather than assumed. Frameless versions hold their geometry with clamps or a header bar across the top; the door swings out and its hinges land on a fixed panel or a wall, never on air. Get any of that wrong and the door binds at one corner and gaps at the other.
Anyone with a rectangular alcove already framed for a tub or a straight shower. This shape only earns itself in a true corner, and forcing it into an alcove gives up interior room without buying back any floor. It is also the wrong pick when a bath is being gutted anyway and the layout is open, because a straight walk-in panel or a corner enclosure with a square front usually leaves more standing room inside for the same square footage of tile. Ceiling height deserves a look too, since a header bar has to clear whatever slopes overhead in an attic or dormer bath.
Yes, and a corner bench fits naturally because the angled front leaves both back corners free. The bench has to be tiled and sloped to drain before the glass is measured, since it changes where a side panel lands and how the bottom of the door clears. Plan the seat during the tile work rather than after it.
It needs one that matches the angle. Ready-made neo-angle bases come in set sizes and set corner angles, so the glass is ordered to the base. A tiled curb is the flexible route: the mason builds the angle the room wants and the panels are cut to that finished line. Either way, the base comes first.
Neo-angle glass is ordered to the curb, so the measure has to come after tile. Tell us where the shower sits and what is standing in front of it, and we will set the free in-home measure and work the angle out on site.
